Plastic bag machine problem solution in Edenvale,Germiston,Johannesburg,South Africa
Plastic bag machine processing is the final step in the manufacturing and processing of flexible plastic bag. If the quality of plastic bag machine process is not a good one or the amount of material used is excessive, the previous processes , such as blowing films or composite printing could be exhausted and downstream customers are likely to have an enormous impact on the production and operations.
1. What can I do if my bag’s contents leak or become damaged because of the insufficient sealant of the bag maker machine?
Cause: Low anti-pollution heat-sealability of the film mostly due to the resin used to seal the outer layer isn’t suitable for.
Countermeasures: Choose an anti-pollution film that has good heat-sealability. The general rule is that ldpe has moderate anti-pollution heat-sealability. EVA is a good anti-pollution heat sealability in the event that the VA contents are large. Ionic resin and metallocene-based polymer It is extremely effective in preventing pollution heat-sealability.
2.What is the best course of action if the seal of the bag making machine is weak
1. The temperature for heat sealing is too high.
2. The pressure is too high.
3. The time to seal heat is not enough;
4. A sharp edge on the top section of the sealer sharp or the coated is damaged.
5. The seal at the bottom is Silicone rubber that is too for the job;
6. During the process of compounding and curing in the compounding and curing process, a small portion of the adhesive gets absorbed into the film. When the substrate is impacted by the adhesive. The hardness (that is, resistance to impact) has diminished and the brittleness grown;
7 Plastic composite baggies for packing after cooling and putting in place the bags, the durability of the heat seal improves as well as it tends to soften.
1. In accordance with the heat sealing properties of the inner sealing material, choose the right temperatures, pressure, and time for heat sealing;
2. Improve the condition of the surface of the heat sealing knife so that it makes the sealer’s surface smooth;
3. Cover with polyethylene cloth wrapping is still intact.
4. Select a pad made of silicone that is of the right toughness.
What can I do if my bag begins to warp after it has been heated sealed by the bag maker?
1. The film’s thickness is variable;
2. The temperature for heat sealing is too high, or the time to seal will be long.
3. In the heat sealing knife’s longitudinal component The running path of composite films isn’t straight.
4. Insufficient cooling.
5. The curing time isn’t enough.
6. The film that covers the surface of the substrate has a low resistance to heat.
7. Inadequate control of the tension-matching to the substrate of the composite during the process of compounding can result in residual stress after curing and setting, particularly in cases where the composite film is smaller and such failures are more likely to occur.
1. The tension can be adjusted on the roller that is floating.
2. Use an inner sealing base with low temperature heat sealing.
3. Adjust the temperature of the heat seal to a suitable temperature.
4. Let it cool down to a certain degree.
5. Films should be mature.
6. Re-select the film on the surface.
7. Adjust the tension of every component of the composite processing equipment, and then try to ensure that both substrates shrink the same.
What can I do if I notice that the outer shape of the heat-sealed exterior of the bag maker is not visible after heat-sealing? (The knife’s pattern is not evident)
The reason is:
1. The cooling process is short.
2. The cooling plate is not in good contact with the plate
3. When the pad of silicone is heated, the edges melt.
4. Forces of heat sealing in the longitudinal direction that are not balanced
5. Edge of heat sealing knife is sloping and blunt.
1. Set the cooling time.
2. Adjust the cooling plate to your liking.
3. Adjust or replace the knife that seals heat
4. Avoid melting at the edge due to overheating of the silicon pad.
What can I do if the sealing power of the bag-making machine is not as strong after heat sealing?
the reasonfor this:
1. The adhesive used in the composite film hasn’t been sufficiently cured.
2. The conditions for heat sealing aren’t appropriate.
3. It is too long that the distance between heat sealing and cooling knife is too long.
4. There is an issue with the inner layer of sealing.
5. The ability to seal heat in the ink is not as strong, which results in a reduction in the strength of the composite of the film on the part that is sealed with heat.
6. Dust or spray powders and other substances stick on the cover.
7. The strength of the composite is not high or the strength of the heat-sealed area decreases too much.
1. Encourage the hardening of the glue (curing as well as curing) by preserving heat and aging. This will improve the strength and resistance to heat of the film composite.
2. Find the ideal conditions for heat-sealing (temperature as well as time and pressure) in accordance with the structure of the material, its heat-sealing state and so on. You can also modify the method for heat-sealing and then cool down immediately following sealing the heat.
3. Verify the shelf time and storage conditions of the film with a heat seal. If the film is made of the film from the previous batch and is the same film has been sealed with heat requires special attention, it is recommended to do so.
4. The thickness of the heat-sealable material.
5. Modify the type and the grade of the film that can be heat-sealable and choose a film that has anti-pollution heat-sealability.
6. Make sure the quality of the adhesive meets specifications (the exudation of low-molecular compounds within the resin could alter its composition)
7. Improve the heat sealing efficiency in the layers of heat. regulate the contents in the slip-agent and make use of MLLDP film.
8. Monitor the monomer concentration that is present in MDI within the composite adhesive.
What can I do if the formation of air bubbles, or uneven surface appear in the heat-sealed area of the bag-making machine?
1. If heat-sealing takes place on structures made of hygroscopic materials like nylon film the hygroscopic film can create air bubbles after it is absorbed by moisture.
2. The heat-sealing blade or pad of silicone is not even.
3. Insufficient pressure for heat sealing.
4. One-component adhesives, like neoprene adhesives when you seal bags using heat are used, the heat cover can be prone to pits.
1. Maintain the raw materials and semi-finished goods in a proper manner to prevent the absorption of moisture.
2. Make sure to adjust or test or adjust the knife for heat sealing or heating silicone pads.
3. Remove the tape.
If you need any information of blown fim extrusion,plastic bag machine,bottom sealing machine,printing machine,please feel free to contact us.
Kingdom Machine Factory supply and sale machines in Pinetown,Pretoria,Port Elizabeth,George,Gauteng,Cape Town,Duban,Booysens,Ekandustria,Wynberg,Edenvale,Germiston,Johannesburg,South Africa.
email@example.com;firstname.lastname@example.org; www.blownfilmextrusion.com; www.kingdommachine.com;
Ruian Economic Zone,Wenzhou,China
Automatic T-shirt bag making machine is applied to manufacturing and printing the uncolored vest bags made of HDPE, LDPE roll film. It adopts PLC control, double step motor fixed length and the liquid crystal touch screen actual display to finish the feeding, sealing, cutting, punching holes and transporting only in one process. It is of high degree of automation and good economic result.
Automatic T-shirt bag making machine control by PLC,with two photocell,two lines,speed 150-250 piece per minute for one line.
Main Technical Variables:
Model: DFHQ-350*2; DFHQ-450*2
Max. Bag-making width:300mm*2;400mm*2;
Weight of machine:1400kg;1600kg;
China Kingdom Machine Co., Ltd. Is a well established company in the manufacturing of a wide range of plastic bag machine including nylon film blowing machine,nylon plastic bag making machines,flexographic printing machine,rotogravure printing machine,stretch film machine,bubble film machine,recycle machine,straw making machine and other plastic machines.
“Kingdom” production team have over 15 years produce experience,most of our machines
export to Nigeria,south africa,iran,dubai,southamrica,Chlie,brazil,Colombia,
and other parts of the world. “Kingdom” insists to make machines with simple design, guest first.
Ruian Economic Zone,Wenzhou,China 325200
Double layer stretch film machine uses LLDPE as main material and adopts several kinds of resins to manufacture the single/double-side self-sticky stretch wrapping film. The film has good tensile strength,anti-pricking ability and impact strength. Its good shrinking memory function and self-sticky can make goods integrity to prevent goods from loosening and collapsing during transportation and being polluted by dust. The transparency and tensile strength of this product can make the packaging beautiful, economical and practical. The film can be widely used in wrapping of palletized goods. Its a good substitute for hot shrinking packaging film during transportation. Technical Parameter:
Item/Model KD-500*2 KD-1000*2 Screw diameter(mm) 55*2 65 *2 L/D ratio of screw (L/D) 28:1 28:1 width of die head (mm) 650 1250 Width of finished products(mm) 500(250*2rollers) 1000(500*2rollers) Thickness of finished products (mm) 0.017-0.05 0.017-0.05 Structure of film layers A/B A/B Max output (kg/h) 40 100 Linear speed of machinery (m/min) 10-120 50-100 Total power (KW) 50 140 Overall dimensions (L*W*H)m 6*1.5*2.5 10*4*3 Weight (T)(About) 3 8 Optional Equipment: 1) Auto loader 2) Auto dry hopper 3) Motorize net changer 4) Hydraulic net changer 5) Air shaft 6) gule pump
Kingdom Machine co.,ltd team professional produce rotogravure printing machine, blown film lines, blown film extrusion,bag making machine,flexo printing machine,stretch film machine,bubble film machine,recycle machine for over 15 years.
Kingdom Machine co,ltd
Ruian Economic Zone,Wenzhou,China 325200
Polypropylene Drinking straw making machine extrusion have 1 color, 2 colors,3 colors,4 colors,5 colors
drinking straw diameter from 3mm to 15mm.
Suit market:Drinking bar,milk drinking straw,cocktail stir straws,cocktail drinking straws,cofa bar,Lollipop.
This model is a tube extrusion line, composed of extruder and die ,Vacuum calibration and cooling unit,haul-off unit, rotary cutter unit, The series machines can produce all kinds of drinking straw,spiral strip straw,medical pipe, all the machine’s controls base with the control elements ergonomically adapted to permit easy operation.
1.The extrusion die can be special designed and easy exchanged to produce pipe and shaping stuff,
2.Water bath in stainless steel can be adjusted in three planes ,
3.The haul-off unit can be belt or rollers, it is customizable.
4.Fitted with single or double rotary cutter .
Video of drinking straw making machine
Kingdom Machine Co.,ltd
Ruian Economic Zone,Wenzhou,China 325200
Air bubble film machine extrusion is scientific and reasonable structure design, smooth and reliable running and convenient operation and maintenance. Polyethylene air-cushion film (also called polyethylene bubble film), which is divided into two kind: ordinary polyethylene air-cushion film and composite polyethylene air-cushion film, is a kind of packing material which has been widely used at present. It not only has good cushioning effect, shock resistance and heat-sealing performance, but also has such advantages as good corrosion resistance and transparency , etc. So it has been widely used for packing, household wares, post parcel, bicycle , polyurethane furniture, etc.1.This air bubble film machine’s aircrew adopts the disposable shaping craft.
1.This air bubble film machine‘s aircrew adopts the disposable shaping craft.
2.The air bubble film machine is our factory that draws demotic and international advanced technology extensively, through a large number of production practic eses in having ordinary equipment originally, develop, designing,can produced polyethylene compound bubble(cushion) membrane in succession.
3.Designs science, practical. Rational in structure of the air bubble film machine.
4.The main machine and the composite parts can realize ganged frequency-converting.
The frequency converting is stable and accurate. The temperature control adopts PID intelligent temperature control.It is energy saving ,environmental and aureate.The composite parts can adjust pneumatic control which can saves a lot of time and efforts.
Model: KDPEG-1000 KDPEG-1200 KDPEG-1500 KDPEG-2000;
Main&minor Screw Dia.: 60mm/50mm 65mm/55mm 85mm/65mm 95mm/70mm;
Film width: 1000mm 1200mm 1500mm 2000mm;
Output: 120kg/h 160kg/h 180kg/h 250kg/h;
Total power: 75kw 95kw 120kw 165kw;
L/D: 28:1 28:1 28:1 28:1;
Linear speed: 1100m/hour 1100m/hour 1100m/hour 1100m/hour;
Weight: 5T 6T 7T 9T;
Kingdom Machine co,ltd
Ruian Economic Zone,Wenzhou,China
Manufacturer Supply Sale Plastic T-shirt Shopping Nylon Bag Machine Line in Tema Ghana
Automatic T-shirt Shopping bag making machine with two servo motor,two photocell,two lines,two punch device,can produce two T-shirt bag at same time.
Plastic Bag Machine Line futures:
1.Plastic T-shirt bag machine uses step motor or servo motor for feeding, machine speed control by computer. 2.Machine with automatic punch device. 3.Bag machine easy to change bag size by computer. 4.Plastic T-shirt bag machine is specialized for manufacturing T-shirt bag. 5.Available produce double lines T-shirt bag,bag can with square bottom,call stardand bag. 6.Equipped with 2 photocells,2 lines can produce printed bag at same time. 7.This model machine can produce 2 lines bag,produce 2 bags at same time. 8.Machine simple design,easy operate. 9.This plastic bag machine will stop automatically and alarming when the printing photocell tracking fail. 10.max bag width 400mm,machine speed 150-350 piece per minute
11.bag meterial: LDPE, HDPE
youtube link: www.youtube.com/watch?v=9QxJBGdGOHY
Kingdom Machine Co.,Ltd. Is a well established company in the manufacturing of a wide range of plastic nylon bag cutting machine lines including film blowing machine,blown film machine, plastic bag making machine, flexographic printing machine, rotogravure printing machine, stretch film machine,recycle machine, straw making machine and other plastic machines.
Kingdom Machine Factory can supply and sale automatic Polyethylene Nylon T-shirt bag machine,Plastic trash bag machine,sachet water bag machine,blown film extrusion,film blowing machine,flexographic printing machine,rotogravure printing machine,drinking straw machine,stretch film machine to Accra,Kumasi,Sekondi-Takoradi,Ashaiman,Sunyani,Tamale,Tema,Greater Accra,Ghana,SENEGAL, GHANA, NIGER, NIGERIA, CAMEROUN, ETHIOPIA, TANZANIA, ZAMBIA, ZIMBABWE, REUNION ISLANDS, SOUTH AFRICA,Africa.
Our machines are well favoured by customers due to easy operation, perfect performance, easy maintenance good & prompt after sale service. “Kingdom” production team have over 30 engineers,most of engineers have over 15 years produce experience in plastic machine field.
How To Find Polyethelene For Blown Film Extrusion. Extrusion Film Extrusion use Polyethelene,such as Low Density Polyethylene(LDPE),High Density Polyethylene(HDPE) and Linear Low Density Polyethylene(LLDPE),Polypropylene(PP).
IF you need material for plastic bag,below are big brand material supplier in the world,they open office all over the world,you can check them in local market.
1.Sabic Saudi Basic Industries Corporation www.sabic.com
2.ExxonMobil Chemical Company www.exxonmobilchemical.com
3.Dow Chemical Company www.dow.com
Kingdom Machine Co.,ltd
sale@kingdommachine . com
Tel.: +86-577-66881211; Fax:+86-577-66881311
There are a variety of good reasons that one might choose to consider when booking a cleaning service. If you’re one of these individuals, you almost certainly have your personal good reasons. However, if you’re aiming to decide for sure whether or not you want to consider when booking a cleaning service, you should consider the possible reasons below.
The primary motive is definitely that the cleaners are very professional. This is significant to a few folks and not as essential to other people, however it’s nevertheless a little something you must think of.
Another reason you ought to consider when booking a cleaning service is actually check they have all the rights to work and also have the right equipments. Let me explain. You want leave your office or you want live the space you’d like to be cleaned to someone you can trust.
One final thing you ought to think about is checking their previous work, if they are good and how long they have been in business. This reason just might decide for you considering that is always good to make sure you are in the right hands.
As you can see, there are many excellent reasons to consider when booking a cleaning service, and there are lots more than those cited above. Once you’ve had some time to give it some thought, if you determine that you would like to consider when booking a cleaning service, go to this Commercial Cleaning Company London website. It has all the info you need to get going.
1.Plastic bag making machine is suitable for high density polyethylene (HDPE), the low density gathers alkene (LDPE) plastic film material.which is produces the plastic film to flat bag,
2. the performance of Plastic bag making machine is stable, the back cover is reliable, is the large, medium and small processed foods enterprise is most economical appropriately, bag sealing&cutting system equipment.
Plastic bag machine with below parts and information:
1.step motor or Japan servo motor ;
2.machine with photo cell;
3.produce flat open bag,patch bag and T-shirt bag;
4.suit to use LDPE and HDPE film to produce plastic bag.
Plastic bag making machine technical Parameter :
Model: SHXJ-A600 SHXJ-A700 SHXJ-A800 SHXJ-A900 SHXJ-A1000
width of sealing &cutting: 580 mm 680 mm 780 mm 880 mm 980 mm
length of sealing & cutting: 700 mm 1200 mm 1200 mm 1400 mm 1600 mm
speed of bag-making (pc/min): 240-400 240-400 60-100 50-100 40-100
Kingdom Machine professional produce Blown film extrusion,plastic bag machine,bottom sealing machine,side sealing machine,plastic T-shirt bag machine for Ajman,jebel ali free zone,dubai,Sharjah United Arab Emirates (UAE).
Kingdom Machine co,ltd Mobile:0086-1358812663; 0086-13088651008;
Address:Ruian Economic Zone,Wenzhou,China
1.Plastic bag making machine is suitable for high density polyethylene (HDPE), the low density gathers alkene (LDPE) plastic film material.which is produces the plastic film to flat bag, 2. the performance of Plastic bag making machine is stable, the back cover is reliable, is the large, medium and small processed foods enterprise is most economical appropriately, bag sealing&cutting system equipment. Plastic bag making machine Technical Parameter :
1.control by PLC
2.machine with photocell,can make printed bag and unprinted bag
3.suit to produce flat open bag,T-shirt bag,patch bag,rolling bag,garbage bag,trash bag.
4.with account device
5.speed control by inverter
6.bag width from 10mm to 2000mm.